[ The PC Guide | Systems and Components Reference Guide | Motherboard and System Devices | System BIOS | BIOS Settings | Standard Settings ]
IDE Primary Slave
This is where the hard disk parameters are entered for the primary slave IDE device, the second drive in a modern IDE system. See the hard disk section for details on what these terms mean and how these devices are set up. The various settings for the drive are discussed in detail in the IDE Setup / Autodetection section. The default setting for this on a system with IDE autodetection, is usually "Auto".
Next: IDE Secondary Master
| The PC Guide
(http://www.PCGuide.com) Site Version: 2.2.0 - Version Date: April 17, 2001 © Copyright 1997-2004 Charles M. Kozierok. All Rights Reserved. |
Not responsible for any loss resulting from the use of this site. Please read the Site Guide before using this material. |